HPE Compute Ops Management

1- Create session 2- Set environment variables for all resource API versions (from the API reference)3-Set environment variables for all job templates

Activation-tokens

Generate an activation token to onboard servers

List required subscriptions activities

Appliance-Firmware-Bundles

Get appliance firmware bundles supported upgrades (NOT WORKING)

Async-operations

List all async operations

External-services

List all external services Create external services Delete an external services item Partially update an external-services item.Perform a test with configured external service

List all saved filters Get filterable properties Get a saved filter Get ressources matching a saved filter Update a saved filter Delete a saved filter Create a new filter

Firmware-bundles

List all firmware bundles Get a firmware bundle by ID

Groups-Compliance

List all devices compliance in a group Get a device compliance by compliance Id

Get group 'Production_AI_Systems'Create a group List a group Modify a group Get ID of the first server Dry-run assign a device to a group to capture latest eTags [v1beta2]List all devices in a group Get the critical event notification status of a group Update critical event notification for a group Unassign a device from a group [v1beta2]Unassign all device from a group [v1beta3]Unassign all devices from a group [v1beta2]Delete a group

iLO CloudConnect service-Proxy

Delete Proxy settings Get iLO Proxy settings

iLO CloudConnect service

Create Session with iLO Basic Authentication Is iLO controlled by OneView or COM?Get iLO COM connection status Connect iLO to COM Disconnect iLO from COM

Jobs-Appliance firmware update

1-Get all job templates URIs 2-Get resourceUri of appliance "composer.lj.lab"3-Get latest appliance firmware bundle and capture ID 5-Get appliance firmware update job status 4-Update appliance firmware

Jobs-Group firmware update

1-Get all job templates URIs 2-Get resourceUri of group "RHEL_group"3-Get server group device IDs and Server settings uri 4-Get the firmware bundle id of 2022.03.1 5-Set Production group server settings to use 2022.03.1 6-Update firmware for some servers in server group 6-Update firmware for some servers in server group at scheduled time 7-Get firmware update job status 9-Get Group firmware update activity status

Jobs-Group firmware compliance check

1-Get all job templates URIs 2- Get group "Team-1-ESXi_group"3- Run group firmware compliance check 4-Get group firmware compliance check activity status

Jobs-Group Internal Storage configuration

1-Get all job templates URIs 2-Get group 'ESX-1_server_group' resourceUri 3-Set Internal storage configuration for one server in a group 3-Set Internal storage configuration for all servers in a group with volume name set to empty 4-Get server internal storage job status

Jobs-Group OS Image installation

1-Get all job templates URIs 2-Get group 'ESX-1_server_group' resourceUri 3-Start OS image installation in a group on all servers 4-Get server OS installation job status

Jobs-Power actions

1-Get all job templates URIs 2-Get resourceUri of server "CZ2311004H"3-Server HPE-HOL-07 - Reset 3-Server HPE-HOL-07 - Schedule Graceful shutdown 4-Get server power action job status

Jobs-Servers firmware update

1-Get all job templates URIs 2-Get resourceUri of server "HOL-07"3-Get the firmware bundle id of 2022.03.1 4- Update firmware on HOL-017 using 2022.03.1 5-Get firmware update job status

Jobs-Server inventory

1-Get all job templates URIs 2-Get resourceUri of server "MXQ3500KS7"3- Collect software inventory of a server 4-Get server inventory response and job status 5-Get details about job_ (from UI Doorway)6-Get server inventory 7-Get server - Raw inventory (adds storage and PCI slots information and more) Copy

Jobs-Server network connectivity

1-Get all job templates URIs 2-Get resourceUri of server "CZ2311004H"3- Collect server network connectivity 4-Get server network connectivity response and job status

Jobs-_Not supported yet-Server iLO SSO

1-Get all job templates URIs 2-Get resourceUri and iLO url of server "ESX-1"3- Get server iLO SSO 4-Get server iLO SSO job status

Jobs-_Not supported yet-Server Power Meter Data

1-Get all job templates URIs 2-Get resourceUri server "ESX-1"3- Get server Power Meter Data 4-Get server power meter data job status

List 10 latest jobs Get a job by ID Patch a job by ID

List all job templates and set environment variables for each ID Get the job template for Server Restart (Restart.New)Get the job template for Group firmware update Get the job template for Server firmware update (FirmwareUpdate.New)Get the job template to construct the SSO url Get the job template for GetPowerMeterData from OneView Get the job template for iLOSecurity Get the job template for Server Power On Get the job template for Server Power Off Get the job template to get full server inventory

Metrics-configurations

List all metrics data collection configurations Create metrics data collection configurations List metrics-configurations item by ID Delete metrics-configurations item by ID Patch a metrics-configuration item

OneView-appliances

Get a OneView appliance by IP Add a OneView appliance Get a OneView appliance by deviceId Delete a OneView appliance by deviceId Check compliance for a OneView appliance Get a OneView appliance settings compliance report

OneView-settings

List all OneView appliance settings

OneView-server-templates

List all OneView server templates

Reports-Run a sustainability report

1- Get Job Template URI of 'Create Carbon Footprint Report'2-Create a filter for server SN="CN70490RXQ" and capture URI 2- Get the filter URI for 'All servers'3- Run Sustainability Report for ONE server 4-Wait for the job to complete and get report uri/id 5-Get Run report activity status 6-Get Sustainability Report 7-Get Sustainability Report Data 8-Get Co2 emissions + energy consumption for all and individual server 9-Delete temporary filter for CN70490RXQ

Reports-Run a Server hardware inventory report

1- Get Job Template URI of 'GetFullServerInventory'2-Get server with SN="CN70490RXQ" and capture ID/URI 2- Get the filter URI for 'All servers'3- Run ALL Server FILTERED Hardware Inventory Report 4-Wait for the job to complete and get report uri/id 5- Get Server Hardware Inventory Report 6-Get A Server Hardware Inventory Data

Reports-UI Doorway

Get kgCO2e / kWh / USD for all + only 'ProLiant DL345 Gen11'

Get SERVER HW INVENTORY report Get SUSTAINABILITY report DATA Get SERVER HW INVENTORY report DATA

Get a schedule by name Get a schedule ID Delete a schedule Update a schedule Create a schedule List all history of a schedule Get a history resource

1-Get server with SN="TWA22565A6" and capture id List all alerts for a server

Servers-Inventory

1-Get server with SN="TWA22565A6" and capture id Server Inventory (new)Server Raw inventory (legacy)Server Subset Inventory (processor)Get Server Adapter to Switch Port Mappings Get Server External storage Get Server Alerts Get Server Security Parameters Analyze server configuration for OS installation

Servers-Notification

1-Get server with SN="TWA22565A6" and capture id Get notification status - critical event and health notification status for a server Update critical event and health notifications for a server

Servers-OS details

Get a server named "esa-sut3.lhperflab.hpe.com" (with OS)

Servers-Configuration-iLO Security parameters

1-Get all job templates URIs 2-Get resourceUri of server "MXQ3500KS7"6-Get server security settings after change 4- Configure ignore iLO Security risk settings 5-Get server iLO Security dashboard job status

Servers-Configuration-Email notification

1-Get server with SN="TWA22565A6" and capture id Disable Email Notification

Servers-Configuration-Auto iLO Fw Update

1-Get server with SN="TWA22565A6" and capture id Disable Auto iLO Fw Update

Servers-Wait for inventory to complete (when a server has been recently added to COM)

1- Get server with SN="CZJ3100GDB" and capture id 2- Wait until server raw inventory information is available 3- Wait until 'state_' is 'Connected' from UI-Doorway

Servers-Filters

List of servers from the 10th

List all servers Get server for group membership and locationId (from UI Doorway)Get a server by ID

Server-locations

Get location: Mougins Get location: Houston Assign server to location: Mougins Delete servers from location: Mougins

Settings-Create server settings-Firmware

1- Get firmware bundles ID for SPP 2022.03.1 2- Create a server setting for firmware

Settings-Create server settings-OS Deployment

Create an OS deployment server settings

Settings-Create server settings-Internal Storage

Create an internal storage of 100GB in RAID1

List server setting 'RAID1'Get a server settings item by ID Patch a server settings item Delete a server settings item

Server-settings-Create server settings-Firmware

1- Get firmware bundles ID for SPP 2022.03.1 2- Create a server setting for firmware

Server-settings-Create server settings-OS Deployment

Create an OS deployment server settings

Server-settings-Create server settings-Internal Storage

Create an internal storage of 100GB in RAID1

Server-settings

List server settings 'RAID1'Get a server settings item by ID Patch a server settings item Delete a server settings item

User-preferences

Get user preferences for the current user Create user preferences for the current user Get a specified user preference object Update user preferences

List all webhooks List a webhook Delete a saved webhook Create a webhook for all Server-setting events Create a webhook that activates when a server transitions to an unhealthy status Get all deliveries of a particular webhook Get details for a specific delivery Disable a webhook Send a server webhook test to endpoint URL

HPE Image Streamer

1- Login-sessions 2- Get-X-API-Version 3- GET OS Deployment Server IP 4- Get I3S API version 5- Get Golden Images 6- Get Deployment Plan 7- Get the AMVM information 4- Upload Artifact bundles

1- Get-X-API-Version 2- Login-sessions using AD Get-Login Details

Get - Events Get - Audit Logs - Component = Authentication Get - Alerts non active older than 3 months Delete - all non active alerts older than 3 months Get - Tasks

Appliance-Second network interface (only for VM appliance)

Get-Network-Interface Configure-Second-Network-Interface -DHCP Get-Task-object-Result Get-Static-routes Configure-Static-Routes

Appliance-Updates

Get Updates schedules Enable updates schedules and frequency

Appliance-Health Status

Get Appliance State Get Appliance Health status

Appliance-Schema (hierarchy)

Get enclosures schematic Get server hardware schematic

Get Global Settings Get Appliance Node Info Get Appliance HA Node Info Get Appliance version Get Appliance Hardware configuration

Associations-Rack Mount

1- Login-sessions 2- Get-X-API-Version 3- Get-Server-Hardware-ESX5-0-uri 4- GET-Rack-URI-using-association 5- GET-Rack-Ressource-Name

Associations-Synergy Servers

1- Login-sessions 2- Get-X-API-Version 3- Get-SPT - Win2016 deployment with Streamer - Gen9 4- Get-Enclosures 12- GET-SP-to-SH-association 11- Get-Server-Profile 'rhel-1'9- Get-Server-Hardware 'Frame4, bay 9'

Get-Backup Create-Backup Get-Task-object-Result

Drive Enclosure-SP - Find D3940 allocated Logical Drive/JBOD-disk information-Not Working

3- GET-Drive bay 1 to Drive Information 3- GET-First Logical JBOD - First Drive information

Drive Enclosure-SP - Find D3940 allocated Logical Drive/JBOD-disk information

1- Get Profile "test" + save sasLogicalJBOD Uri 2- Get FIRST sasLogicalJBOD Uri Index Trees + Save Drives info 3- Get SECOND sasLogicalJBOD Uri Index Trees + Save Drives info

Drive Enclosure

Get-Drive Enclosures

1- Login-sessions 2- Get-X-API-Version 3- Get-Enclosures Efuse-Encl1-Manager-Bay1 Efuse-Encl2-Manager-Bay1 Efuse-Encl3-Manager-Bay1

Get-Enclosures - Appliance IPv6 LL Addresses

Get the Hypervisor Managers from OneView Get the Hypervisor Cluster Profiles from OneView

Get IPv4 Subnet Pools Get IPv4 Subnet 1 Get IPv4 Subnet 1 - Range 1 Get IPv4 Subnet 1 - Range 1 - Available IPs Get IPv4 Subnet 1 - Range 1 - Allocated IPs Create ID Pools IPv4 Subnet Release IP addresses from an IPv4 subnet range

Get-Index-resources - LIGs Get-X-API-Version Get-SP - [RHEL-1]Get-Index-resources - [RHEL-1] Copy Get-Index-Trees - [Server_Profile RHEL-1]Get-Network - [Prod-12]Get-Index-resources - [Prod-12]Get-Index-Trees - [Ethernet_network prod-12]

Interconnect-VC 40G SE

Get-Interconnect Get VC40G Frame1-Bay3-FC Port Q4:1 Logins Get VC40G Frame2-Bay6-FC Port Q4:1 Logins Get VC40G Frame1-Bay3-port Q1 Get VC40G Frame2-Bay6-port Q1 Get VC40G Frame1-Bay3 Statistics Get VC40G Frame1-Bay3-Port Q1 Statistics Get VC40G Frame1-Bay3-Port d1 Statistics Get VC40G Frame1-Bay3-Port d1-Subport 1 Statistics Get VC40G Frame1-Bay3-Port d1-Subport 2 Statistics Get VC40G Frame2-Bay6 Statistics Get VC40G Frame2-Bay6-Port Q1 Statistics Get VC40G Frame2-Bay6-Port d1 Statistics Get VC40G Frame2-Bay6-Port d1-Subport 1 Statistics Get VC40G Frame2-Bay6-Port d1-Subport 2 Statistics Get VC40G Frame1-bay3 cpu and memory Utilization Get VC40G Frame2-bay6 cpu and memory Utilization Get-interconnect VC40G Frame1-bay3 PATCH VC40G Frame1-bay3-Set-Netop-user Get-interconnect VC40G Frame2-bay6 PATCH-Factory reset and reapply previous configuration - interconnect VC F2-b6 -

Get-Interconnect Get VC ''Frame3, interconnect 6"Get VC Metrics Get VC Statistics Get VC port Q1 Statistics Get VC port d3 Statistics

Get-Licenses Delete-License

Logical Enclosure-Firmware Updates

1- Logical Enclosure "LE_2_Frames_100G"2-Get SSP baseline bundle 'SY-2023.03.01'3- Update all the infrastructure components in the enclosure in orchestration for a Logical Enclosure (Synergy Frame Link Module and Logical-Interconnects)4- Get-Task-object-Result

Logical Enclosure

Logical Enclosure "LE_2_Frames_40G"

Logical Interconnect

Logical Interconnect Logical Interconnect CAM Table Logical Interconnect Ethernet Settings Logical Interconnect IGMP Settings Logical Interconnect Internal VLANs

Logical Interconnect Group

Get-Logical-Interconnect-Group POST LIG

Get-Audit-Logs Get-Audit-Logs Settings Reset-Audit-Logs Settings Set iLO sysLogs on a server Get-Remote-Syslog Settings Reset-Remote-Syslog Settings

Metrics-Server Hardware

Get SH "Frame4, bay 3"Get SH PowerCap

Metrics-Interconnect

Get VC ''Frame1, interconnect 3"Get VC Metrics Get VC Statistics Get VC port Q1 Statistics Get VC port Q5:1 Statistics

Get Enclosure ''Frame3"Get Enclosure PeakPower

Get-Metrics-capability

Get network set "Production_network_set"Create network set Modify network set

FC-Networks Delete an Ethernet network without Force

OS deployment plans

Get the OS Deployment plans from OneView

Get-Remote Support Registration Get-Remote Support Configuration Set-Remote Support Configuration Enable Remote Support Register for Remote Support Delete the current Insight Online registration Get-Remote Support Status Report

Reserved VLAN range

3- Get-Reserved-VLAN-range 4- Get-Logical-Interconnect 5- Get-Internal VLANs 4- Put-Change-Reserved-VLAN-range 5- Get-Task-object-Result 6- Get-New-Reserved-VLAN-range

Search / Index-By Category

Get-Search Index Resources Users

Get-Search Index Resources Get-Search Index Resources for a given resource URI

Get-Scopes Get-Labels Get-Labels 3 resources

Security-Certificates-Appliance certificates

Create Certificate Signing Request (CSR)Import CA Signed appliance certificate

Security-Certificates

Get-Appliance SSL certificate Get-Appliance certificates CERT_CHAIN_WITHOUT_ROOT_CA Get-Client SSL certificates Get-Internal Certificate Authority certificate (when OV uses a self-signed cert)Get-SCMB RabbitMq default certificate Get-LIOGW Root CA certificate Get-Server SSL certificate of hpe.com Get-CA CRL Upload CRL Generates an internal CA signed certificate for RabbitMQ clients Copy Generate Self-signed appliance certificate

Security-Session

Get-Session settings Put-Session settings

Security-Directory

List configured directories Add Directory configuration for User authentication Copy Get Directory configuration for lj.lab Delete Directory configuration for lj.lab List directory Users List groups for a specified directory Retrieve all directory group permission assignments across all configured directories.Create a directory group with permission assignments Get directory group OneView users permission assignments Delete directory group OneView users

3- Get-Security-Modes 3- Get-Security-Modes - Current 3- Get-Security-Modes - FIPS 3- Get-Security-Protocols 3- Get-Security-Protocols - CNSA 3- Get-Security-Protocols Details - CNSA 3- Get-Security-Global-Settings 3- Get-Security-Algorithms - Signature / Legacy 4- Put-Security-Protocols-Remove-insecure-ciphers-in-TLSv1.2 (not supported by API)3- Get-Appliance-Encryption-Key 3- Get-Appliance-SSH-Host-Keys

Server Hardware-Add rack-mount server

Add a rack-mount server

Server Hardware

Get-Server-Hardware : esx5-2-ilo.lj.lab Get Frame 4 bay3 AmbientTemperature Metrics Get-Server-Hardware iLO SSO URL Get-Server-Hardware iLO Session key Turn the server UID light ON on a server Power on a server

Server Profiles-Firmware Updates

1- Get Profile 'RHEL83-2' - Filter name and collect SHuri 2-Get SSP baseline bundle 'SY-2023.03.01'10- Get-Server-Hardware SUT status 6-Update Profile to activate the staged components with FW & OS Drivers online update 7- Get-Task-object-Result 9- If error, reapply profile firmware component 11- Soft power off server if reboot needed for activation

Server Profiles

Get Profiles - Filter name 'rhel-1'Delete profile - Force Reapply profile components 2-Create an advanced Gen10 profile 3- Get-Task-object-Result

Server Profile Templates

GET Server Profile Template "ESXi_BFS_EG_100G"MODIFY Server Profile Template Create a Server Profile Template

Storage-systems

Get Storage Systems

Get-Volume "RHEL_Boot"Create-Volume Get-Task-object-Result

Unmanaged devices

Get-Umanaged device "Brocade 16G"Set-Umanaged device Management Interface

Get-Rack-Managers

HPE OneView Global Dashboard

Get-Certificates CA Get-Certificate of LIOGW-CA Add-Certificate of LIOGW-CA

1-Create a session 2-Get-X-API-Version 3-Get-Reports 4-Get-Appliance-1-Session key 5-Get-Appliance-2-Session key Get-Appliance named "Composer"Get-Server FW Get-Resources-alerts Appliance-1-Get-Ethernet-Networks Appliance-1-Get-Server-Profiles Appliance-2-Get-Server-Profiles

0_Session-Using OneView iLOSSOURL (requires Composer environment)

1- Login-sessions 2-Get-Server-Hardware : Frame 4 bay3 3-Get-Server-Hardware iLO iloSsoUrl 4-Get RedFish Sessions using SSO URL 5- Get Logical drives Settings

0_Session-Using OneView iLOSSO (requires Composer environment)

1- Login-sessions 2-Get-Server-Hardware : ilo-LIOGW.lj.lab 3-Get-Server-Hardware iLO Session key 4- Get Smart Storage Disk Drives 5- Get Logical drives 6- Get ServiceRoot 7- Get Users

Create Session with iLO AD Credentials

Adapters-Ethernet Interfaces

GET Ethernet Interfaces GET Ethernet Interface 1 GET Ethernet Interface 2 Disable Ethernet Interface 1 Enable Etherne Interface 1

Adapters-Network Adapter (includes HBA)-Deprecated

Base Network Adapter CNA1 (in Systems)BaseNetworkAdapters List with Filter (not working)Base Network Adapters List (in Systems)

Adapters-Network Adapter (includes HBA)-Network adapter modification

1- Network Adapters List (in Chassis)1.1- Network Adapter DC082000 Settings 1.2- Network Adapter DC082000 Port1 Settings 2- Get network adapter functions 3- Get FCoE function settings on an adapter 7- Get FCoE function information on an adapter 5 - Enable RedfishConfiguration on an adapter 6.2- Set FCoE function to FCoE (= FCoE Offload to Enable in BIOS)

Adapters-Network Adapter (includes HBA)

Network Adapters List (in Chassis)Network Adapters DC07B000 - Ports/1 Network Adapter CNA1 Network Adapter CNA1 functions Network Interfaces (in Systems)Network Interfaces - Network Ports (in Systems)

Host Bus Adapter List SmartStorage List Array Controller List Get System /v1/system/1 - Go to OEM/HPE/LINKS

BIOS Settings-Boot Settings

Get Boot properties from ComputerSystem Gen10 Current HpeServerBootSettings Gen10 Pending HpeServerBootSettings Gen10p, Gen11 Current HpeServerBootSettings Gen10p, Gen11 Pending Boot Settings Activate Boot Order Once to USB Gen11 Boot Settings BootOnNextServerReset Default Boot Order Gen11 Restore Bios Boot defaults Boot Options SecureBoot SecureBoot Enabled OneTime Boot

BIOS Settings-Thermal

Set the Server to remain Power OFF after thermal shutdown Set the thermal settings

Get Bios Settings - Current Settings Get Bios Settings - Pending Settings Get Bios BaseConfigs Swap ROM Gen10: Change Advanced Bios Attr C-states

Firmware-Inventory

GET Firmware inventory

Firmware-Offline FW Upgrade using SPP ISO

Create Session with iLO Credentials Compute Power On with boot from ISO Mount SPP ISO iLO Event Log Activate Boot Order Once iLO Integrated Management Log Find if SPP ISO ejected

Firmware-Update Service

Get Update Service SoftwareInventory Collection + Expand Query FirmwareInventory Collection + Expand Query POST SimpleUpdate for iLO FW Upgrade using file Get Update Task Queues Get Update Task Queue 1 Get Update Task Queue 2 POST Actions - Upload Component to iLO Repository Update task scheduled during a specific maintenance window Remove a component in the Installation Queue Remove all components in the Installation Task Queue Creation of a maintenance window Deletion of a specific maintenance window Deletion of all maintenance windows Get Install Sets Get Install Set 1 Get Install Set 2 Create Install Set Modify Install Set Add all the components of an install set in a cleared Installation Queue Get TaskService

Get Account service

iLO-Certificates

iLO SSL Certificate POST Generate CSR POST Import CA-signed certificate Certificate Login Enablement Import SSL/TLS Certificate Import CA Certificate Map Certificate to User Certificate Authentication User Certificate Mapping Trusted CA certificate collection Trusted CA certificate User mapped Certificate User Certificate Mapping collection

iLO-CloudConnect service-Proxy

Delete Proxy settings Get iLO Proxy settings

iLO-CloudConnect service

Is iLO controlled by OneView or COM?Get iLO COM connection status GET Views Connect iLO to COM Disconnect iLO from COM

Get iLO License Add iLO License Delete iLO License

iLO Event Log from today Integrated Management Log Entries iLO Security log

iLO Network Interfaces iLO Network configuration attributes iLO Virtual Network Interface iLO USB Virtual Ethernet Interface iLO4 NetworkProtocol/NetworkService iLO network protocols state GET iLO NIC IP Address iLO5 Set IPv6 StaticAddresses

iLO-Remote Support

Remote Support Service Remote Support Logs Register to Remote Support UnRegister Remote Support Trigger Test Event ClearEventLog Complete Remote Support Registration

Reset iLO iLO Factory Reset

Get Sessions w/ BasicAuthentication Delete Session

iLO-SNMP-Set and Enable SNMPv3

1- Enable SNMP protocol 3-Set SNMPv3 settings 6-Get all SNMPv3 users properties 5-Add SNMPv3 user

Add SNMP Alert Destination List SNMP Alert Destinations Delete SNMP Alert destination Enable/Disable SNMP protocol Enable/Disable SNMP Alerts SNMP Service iLO4 Enable/Disable SNMP protocol

SUT information

iLO-User Management

iLO User Collection AccountService end point New BMC user Modify iLO user iLO User Change iLO Administrator Password Delete Manager User Privileges of Authenticated Users Modify Privileges iLO Role Collection

iLO-Virtual Medias

Get Mount Medias Mount CentOS Livecd ISO_Boot Boot on Next server reboot Mount SPP ISO_RemovableMedia Un-Mount SPP ISO_1 Un-Mount SPP ISO_2

iLO Virtual NIC status Clear Rest Api State Get iLO Time Zone List Set iLO Time Zone Enable USB Virtual Ethernet Interface iLO5 HostName (Dedicated NIC)iLO5 Set FQDN Change iLO TimeZone Enable/Disable iLO SMTP

GET Memory DIMMs

Perform a graceful shutdown followed by a restart of the system iLO5-AuxPowerCycle iLO4-AuxPowerCycle Power Off Server PowerMetrics

Remote Support-Service Events

Gen10: Event Subscription

Get Remote Support Service

Security-Dashboard

Overall Security Dashboard Status Expanded Security Dashboard Params Collection Security Dashboard Param (SNMPv1)Security Dashboard Param (SecureBoot)Security Dashboard Param (Password complexity)Security Dashboard Parameters (SecureBoot)

GET SecurityService SecurityService (FIPS State)iLO4 Enforce AES 3DES Encryption GET Network Protocol PATCH TLS Default Config GET TLS Config - Pending Settings GET TLS Config - Default Settings GET Secure Boot Settings Security Schemas iLO Security Params Schema EntryPoint

Storage-Erase NS204i data

1-GET NS204i ID 2-Erase NS204i data 3-Restart the system

Storage-Smart Storage / Logical Drives-Logical Drives

GET Logical drives GET Logical drives Settings Delete a specific Logical Drive SanitizeDisk

Storage-Smart Storage / Logical Drives

Array Controllers List ArrayControllers 0 ArrayControllers 0 - Physical Drives List ArrayControllers 0 - Physical Drives 0 ArrayControllers 0 - Physical Drives 1 ArrayControllers 0 - Logical Drives List

GET Storage Devices Current Smart Storage Configuration Pending Smart Storage Configuration Set Smart Storage Encryption Boot Options Collection

Get RedFish Telemetry + Expand Query Get RedFish Telemetry Definitions Get average CPU0 frequency for 10mn/sensing interval 20s Get average CPU1 frequency for 10mn/sensing interval 20s Get Memory Bus Utilization for 10mn/sensing interval 20s Get Power Meters

iLO4 - Gen9-Certificates

POST Generate CSR GET Get CSR

iLO4 - Gen9-IP Address

GET iLO NIC IP Address PATCH iLO NIC to IP Static

iLO4 - Gen9-Sessions

Delete Session Get Sessions w/ BasicAuthentication

Get Systems/1/Patch SecureBoot POST iLO Reset GET PCI adapter info POST iLO Factory Reset Copy

iLO5 - Synergy Composer2

1-Create Session with iLO Credentials Get RedFish system Get DiskDrives list Get DiskDrives information

Get iLO - Triggers Get iLO - Thermal Get iLO - Thermal Configuration Get iLO - Power Metrics Get iLO - Power Regulator Change iLO - Power Regulator to Dynamic Power Savings Mode User Temp Config - SetUserTempThreshold - Criticial

Is iLO controlled by OneView or COM?Get System /v1/systems/1 Get iLO - /v1/managers/1 Get iLO - /v1/chassis GET PCI devices

HPE iLO Amplifier

1- Login-sessions Get-Managed Systems Get-Managers Get iLO 192.168.0.10 information Add an iLO

HPE Compute Ops Management

1- Create session 2- Set environment variables for all resource API versions (from the API reference)3-Set environment variables for all job templates

Activation-tokens

Generate an activation token to onboard servers

List required subscriptions activities

Appliance-Firmware-Bundles

Get appliance firmware bundles supported upgrades (NOT WORKING)

Async-operations

List all async operations

External-services

List all external services Create external services Delete an external services item Partially update an external-services item.Perform a test with configured external service

List all saved filters Get filterable properties Get a saved filter Get ressources matching a saved filter Update a saved filter Delete a saved filter Create a new filter

Firmware-bundles

List all firmware bundles Get a firmware bundle by ID

Groups-Compliance

List all devices compliance in a group Get a device compliance by compliance Id

Get group 'Production_AI_Systems'Create a group List a group Modify a group Get ID of the first server Dry-run assign a device to a group to capture latest eTags [v1beta2]List all devices in a group Get the critical event notification status of a group Update critical event notification for a group Unassign a device from a group [v1beta2]Unassign all device from a group [v1beta3]Unassign all devices from a group [v1beta2]Delete a group

iLO CloudConnect service-Proxy

Delete Proxy settings Get iLO Proxy settings

iLO CloudConnect service

Create Session with iLO Basic Authentication Is iLO controlled by OneView or COM?Get iLO COM connection status Connect iLO to COM Disconnect iLO from COM

Jobs-Appliance firmware update

1-Get all job templates URIs 2-Get resourceUri of appliance "composer.lj.lab"3-Get latest appliance firmware bundle and capture ID 5-Get appliance firmware update job status 4-Update appliance firmware

Jobs-Group firmware update

1-Get all job templates URIs 2-Get resourceUri of group "RHEL_group"3-Get server group device IDs and Server settings uri 4-Get the firmware bundle id of 2022.03.1 5-Set Production group server settings to use 2022.03.1 6-Update firmware for some servers in server group 6-Update firmware for some servers in server group at scheduled time 7-Get firmware update job status 9-Get Group firmware update activity status

Jobs-Group firmware compliance check

1-Get all job templates URIs 2- Get group "Team-1-ESXi_group"3- Run group firmware compliance check 4-Get group firmware compliance check activity status

Jobs-Group Internal Storage configuration

1-Get all job templates URIs 2-Get group 'ESX-1_server_group' resourceUri 3-Set Internal storage configuration for one server in a group 3-Set Internal storage configuration for all servers in a group with volume name set to empty 4-Get server internal storage job status

Jobs-Group OS Image installation

1-Get all job templates URIs 2-Get group 'ESX-1_server_group' resourceUri 3-Start OS image installation in a group on all servers 4-Get server OS installation job status

Jobs-Power actions

1-Get all job templates URIs 2-Get resourceUri of server "CZ2311004H"3-Server HPE-HOL-07 - Reset 3-Server HPE-HOL-07 - Schedule Graceful shutdown 4-Get server power action job status

Jobs-Servers firmware update

1-Get all job templates URIs 2-Get resourceUri of server "HOL-07"3-Get the firmware bundle id of 2022.03.1 4- Update firmware on HOL-017 using 2022.03.1 5-Get firmware update job status

Jobs-Server inventory

1-Get all job templates URIs 2-Get resourceUri of server "MXQ3500KS7"3- Collect software inventory of a server 4-Get server inventory response and job status 5-Get details about job_ (from UI Doorway)6-Get server inventory 7-Get server - Raw inventory (adds storage and PCI slots information and more) Copy

Jobs-Server network connectivity

1-Get all job templates URIs 2-Get resourceUri of server "CZ2311004H"3- Collect server network connectivity 4-Get server network connectivity response and job status

Jobs-_Not supported yet-Server iLO SSO

1-Get all job templates URIs 2-Get resourceUri and iLO url of server "ESX-1"3- Get server iLO SSO 4-Get server iLO SSO job status

Jobs-_Not supported yet-Server Power Meter Data

1-Get all job templates URIs 2-Get resourceUri server "ESX-1"3- Get server Power Meter Data 4-Get server power meter data job status

List 10 latest jobs Get a job by ID Patch a job by ID

List all job templates and set environment variables for each ID Get the job template for Server Restart (Restart.New)Get the job template for Group firmware update Get the job template for Server firmware update (FirmwareUpdate.New)Get the job template to construct the SSO url Get the job template for GetPowerMeterData from OneView Get the job template for iLOSecurity Get the job template for Server Power On Get the job template for Server Power Off Get the job template to get full server inventory

Metrics-configurations

List all metrics data collection configurations Create metrics data collection configurations List metrics-configurations item by ID Delete metrics-configurations item by ID Patch a metrics-configuration item

OneView-appliances

Get a OneView appliance by IP Add a OneView appliance Get a OneView appliance by deviceId Delete a OneView appliance by deviceId Check compliance for a OneView appliance Get a OneView appliance settings compliance report

OneView-settings

List all OneView appliance settings

OneView-server-templates

List all OneView server templates

Reports-Run a sustainability report

1- Get Job Template URI of 'Create Carbon Footprint Report'2-Create a filter for server SN="CN70490RXQ" and capture URI 2- Get the filter URI for 'All servers'3- Run Sustainability Report for ONE server 4-Wait for the job to complete and get report uri/id 5-Get Run report activity status 6-Get Sustainability Report 7-Get Sustainability Report Data 8-Get Co2 emissions + energy consumption for all and individual server 9-Delete temporary filter for CN70490RXQ

Reports-Run a Server hardware inventory report

1- Get Job Template URI of 'GetFullServerInventory'2-Get server with SN="CN70490RXQ" and capture ID/URI 2- Get the filter URI for 'All servers'3- Run ALL Server FILTERED Hardware Inventory Report 4-Wait for the job to complete and get report uri/id 5- Get Server Hardware Inventory Report 6-Get A Server Hardware Inventory Data

Reports-UI Doorway

Get kgCO2e / kWh / USD for all + only 'ProLiant DL345 Gen11'

Get SERVER HW INVENTORY report Get SUSTAINABILITY report DATA Get SERVER HW INVENTORY report DATA

Get a schedule by name Get a schedule ID Delete a schedule Update a schedule Create a schedule List all history of a schedule Get a history resource

1-Get server with SN="TWA22565A6" and capture id List all alerts for a server

Servers-Inventory

1-Get server with SN="TWA22565A6" and capture id Server Inventory (new)Server Raw inventory (legacy)Server Subset Inventory (processor)Get Server Adapter to Switch Port Mappings Get Server External storage Get Server Alerts Get Server Security Parameters Analyze server configuration for OS installation

Servers-Notification

1-Get server with SN="TWA22565A6" and capture id Get notification status - critical event and health notification status for a server Update critical event and health notifications for a server

Servers-OS details

Get a server named "esa-sut3.lhperflab.hpe.com" (with OS)

Servers-Configuration-iLO Security parameters

1-Get all job templates URIs 2-Get resourceUri of server "MXQ3500KS7"6-Get server security settings after change 4- Configure ignore iLO Security risk settings 5-Get server iLO Security dashboard job status

Servers-Configuration-Email notification

1-Get server with SN="TWA22565A6" and capture id Disable Email Notification

Servers-Configuration-Auto iLO Fw Update

1-Get server with SN="TWA22565A6" and capture id Disable Auto iLO Fw Update

Servers-Wait for inventory to complete (when a server has been recently added to COM)

1- Get server with SN="CZJ3100GDB" and capture id 2- Wait until server raw inventory information is available 3- Wait until 'state_' is 'Connected' from UI-Doorway

Servers-Filters

List of servers from the 10th

List all servers Get server for group membership and locationId (from UI Doorway)Get a server by ID

Server-locations

Get location: Mougins Get location: Houston Assign server to location: Mougins Delete servers from location: Mougins

Settings-Create server settings-Firmware

1- Get firmware bundles ID for SPP 2022.03.1 2- Create a server setting for firmware

Settings-Create server settings-OS Deployment

Create an OS deployment server settings

Settings-Create server settings-Internal Storage

Create an internal storage of 100GB in RAID1

List server setting 'RAID1'Get a server settings item by ID Patch a server settings item Delete a server settings item

Server-settings-Create server settings-Firmware

1- Get firmware bundles ID for SPP 2022.03.1 2- Create a server setting for firmware

Server-settings-Create server settings-OS Deployment

Create an OS deployment server settings

Server-settings-Create server settings-Internal Storage

Create an internal storage of 100GB in RAID1

Server-settings

List server settings 'RAID1'Get a server settings item by ID Patch a server settings item Delete a server settings item

User-preferences

Get user preferences for the current user Create user preferences for the current user Get a specified user preference object Update user preferences

List all webhooks List a webhook Delete a saved webhook Create a webhook for all Server-setting events Create a webhook that activates when a server transitions to an unhealthy status Get all deliveries of a particular webhook Get details for a specific delivery Disable a webhook Send a server webhook test to endpoint URL

HPE Image Streamer

1- Login-sessions 2- Get-X-API-Version 3- GET OS Deployment Server IP 4- Get I3S API version 5- Get Golden Images 6- Get Deployment Plan 7- Get the AMVM information 4- Upload Artifact bundles

1- Get-X-API-Version 2- Login-sessions using AD Get-Login Details

Get - Events Get - Audit Logs - Component = Authentication Get - Alerts non active older than 3 months Delete - all non active alerts older than 3 months Get - Tasks

Appliance-Second network interface (only for VM appliance)

Get-Network-Interface Configure-Second-Network-Interface -DHCP Get-Task-object-Result Get-Static-routes Configure-Static-Routes

Appliance-Updates

Get Updates schedules Enable updates schedules and frequency

Appliance-Health Status

Get Appliance State Get Appliance Health status

Appliance-Schema (hierarchy)

Get enclosures schematic Get server hardware schematic

Get Global Settings Get Appliance Node Info Get Appliance HA Node Info Get Appliance version Get Appliance Hardware configuration

Associations-Rack Mount

1- Login-sessions 2- Get-X-API-Version 3- Get-Server-Hardware-ESX5-0-uri 4- GET-Rack-URI-using-association 5- GET-Rack-Ressource-Name

Associations-Synergy Servers

1- Login-sessions 2- Get-X-API-Version 3- Get-SPT - Win2016 deployment with Streamer - Gen9 4- Get-Enclosures 12- GET-SP-to-SH-association 11- Get-Server-Profile 'rhel-1'9- Get-Server-Hardware 'Frame4, bay 9'

Get-Backup Create-Backup Get-Task-object-Result

Drive Enclosure-SP - Find D3940 allocated Logical Drive/JBOD-disk information-Not Working

3- GET-Drive bay 1 to Drive Information 3- GET-First Logical JBOD - First Drive information

Drive Enclosure-SP - Find D3940 allocated Logical Drive/JBOD-disk information

1- Get Profile "test" + save sasLogicalJBOD Uri 2- Get FIRST sasLogicalJBOD Uri Index Trees + Save Drives info 3- Get SECOND sasLogicalJBOD Uri Index Trees + Save Drives info

Drive Enclosure

Get-Drive Enclosures

1- Login-sessions 2- Get-X-API-Version 3- Get-Enclosures Efuse-Encl1-Manager-Bay1 Efuse-Encl2-Manager-Bay1 Efuse-Encl3-Manager-Bay1

Get-Enclosures - Appliance IPv6 LL Addresses

Get the Hypervisor Managers from OneView Get the Hypervisor Cluster Profiles from OneView

Get IPv4 Subnet Pools Get IPv4 Subnet 1 Get IPv4 Subnet 1 - Range 1 Get IPv4 Subnet 1 - Range 1 - Available IPs Get IPv4 Subnet 1 - Range 1 - Allocated IPs Create ID Pools IPv4 Subnet Release IP addresses from an IPv4 subnet range

Get-Index-resources - LIGs Get-X-API-Version Get-SP - [RHEL-1]Get-Index-resources - [RHEL-1] Copy Get-Index-Trees - [Server_Profile RHEL-1]Get-Network - [Prod-12]Get-Index-resources - [Prod-12]Get-Index-Trees - [Ethernet_network prod-12]

Interconnect-VC 40G SE

Get-Interconnect Get VC40G Frame1-Bay3-FC Port Q4:1 Logins Get VC40G Frame2-Bay6-FC Port Q4:1 Logins Get VC40G Frame1-Bay3-port Q1 Get VC40G Frame2-Bay6-port Q1 Get VC40G Frame1-Bay3 Statistics Get VC40G Frame1-Bay3-Port Q1 Statistics Get VC40G Frame1-Bay3-Port d1 Statistics Get VC40G Frame1-Bay3-Port d1-Subport 1 Statistics Get VC40G Frame1-Bay3-Port d1-Subport 2 Statistics Get VC40G Frame2-Bay6 Statistics Get VC40G Frame2-Bay6-Port Q1 Statistics Get VC40G Frame2-Bay6-Port d1 Statistics Get VC40G Frame2-Bay6-Port d1-Subport 1 Statistics Get VC40G Frame2-Bay6-Port d1-Subport 2 Statistics Get VC40G Frame1-bay3 cpu and memory Utilization Get VC40G Frame2-bay6 cpu and memory Utilization Get-interconnect VC40G Frame1-bay3 PATCH VC40G Frame1-bay3-Set-Netop-user Get-interconnect VC40G Frame2-bay6 PATCH-Factory reset and reapply previous configuration - interconnect VC F2-b6 -

Get-Interconnect Get VC ''Frame3, interconnect 6"Get VC Metrics Get VC Statistics Get VC port Q1 Statistics Get VC port d3 Statistics

Get-Licenses Delete-License

Logical Enclosure-Firmware Updates

1- Logical Enclosure "LE_2_Frames_100G"2-Get SSP baseline bundle 'SY-2023.03.01'3- Update all the infrastructure components in the enclosure in orchestration for a Logical Enclosure (Synergy Frame Link Module and Logical-Interconnects)4- Get-Task-object-Result

Logical Enclosure

Logical Enclosure "LE_2_Frames_40G"

Logical Interconnect

Logical Interconnect Logical Interconnect CAM Table Logical Interconnect Ethernet Settings Logical Interconnect IGMP Settings Logical Interconnect Internal VLANs

Logical Interconnect Group

Get-Logical-Interconnect-Group POST LIG

Get-Audit-Logs Get-Audit-Logs Settings Reset-Audit-Logs Settings Set iLO sysLogs on a server Get-Remote-Syslog Settings Reset-Remote-Syslog Settings

Metrics-Server Hardware

Get SH "Frame4, bay 3"Get SH PowerCap

Metrics-Interconnect

Get VC ''Frame1, interconnect 3"Get VC Metrics Get VC Statistics Get VC port Q1 Statistics Get VC port Q5:1 Statistics

Get Enclosure ''Frame3"Get Enclosure PeakPower

Get-Metrics-capability

Get network set "Production_network_set"Create network set Modify network set

FC-Networks Delete an Ethernet network without Force

OS deployment plans

Get the OS Deployment plans from OneView

Get-Remote Support Registration Get-Remote Support Configuration Set-Remote Support Configuration Enable Remote Support Register for Remote Support Delete the current Insight Online registration Get-Remote Support Status Report

Reserved VLAN range

3- Get-Reserved-VLAN-range 4- Get-Logical-Interconnect 5- Get-Internal VLANs 4- Put-Change-Reserved-VLAN-range 5- Get-Task-object-Result 6- Get-New-Reserved-VLAN-range

Search / Index-By Category

Get-Search Index Resources Users

Get-Search Index Resources Get-Search Index Resources for a given resource URI

Get-Scopes Get-Labels Get-Labels 3 resources

Security-Certificates-Appliance certificates

Create Certificate Signing Request (CSR)Import CA Signed appliance certificate

Security-Certificates

Get-Appliance SSL certificate Get-Appliance certificates CERT_CHAIN_WITHOUT_ROOT_CA Get-Client SSL certificates Get-Internal Certificate Authority certificate (when OV uses a self-signed cert)Get-SCMB RabbitMq default certificate Get-LIOGW Root CA certificate Get-Server SSL certificate of hpe.com Get-CA CRL Upload CRL Generates an internal CA signed certificate for RabbitMQ clients Copy Generate Self-signed appliance certificate

Security-Session

Get-Session settings Put-Session settings

Security-Directory

List configured directories Add Directory configuration for User authentication Copy Get Directory configuration for lj.lab Delete Directory configuration for lj.lab List directory Users List groups for a specified directory Retrieve all directory group permission assignments across all configured directories.Create a directory group with permission assignments Get directory group OneView users permission assignments Delete directory group OneView users

3- Get-Security-Modes 3- Get-Security-Modes - Current 3- Get-Security-Modes - FIPS 3- Get-Security-Protocols 3- Get-Security-Protocols - CNSA 3- Get-Security-Protocols Details - CNSA 3- Get-Security-Global-Settings 3- Get-Security-Algorithms - Signature / Legacy 4- Put-Security-Protocols-Remove-insecure-ciphers-in-TLSv1.2 (not supported by API)3- Get-Appliance-Encryption-Key 3- Get-Appliance-SSH-Host-Keys

Server Hardware-Add rack-mount server

Add a rack-mount server

Server Hardware

Get-Server-Hardware : esx5-2-ilo.lj.lab Get Frame 4 bay3 AmbientTemperature Metrics Get-Server-Hardware iLO SSO URL Get-Server-Hardware iLO Session key Turn the server UID light ON on a server Power on a server

Server Profiles-Firmware Updates

1- Get Profile 'RHEL83-2' - Filter name and collect SHuri 2-Get SSP baseline bundle 'SY-2023.03.01'10- Get-Server-Hardware SUT status 6-Update Profile to activate the staged components with FW & OS Drivers online update 7- Get-Task-object-Result 9- If error, reapply profile firmware component 11- Soft power off server if reboot needed for activation

Server Profiles

Get Profiles - Filter name 'rhel-1'Delete profile - Force Reapply profile components 2-Create an advanced Gen10 profile 3- Get-Task-object-Result

Server Profile Templates

GET Server Profile Template "ESXi_BFS_EG_100G"MODIFY Server Profile Template Create a Server Profile Template

Storage-systems

Get Storage Systems

Get-Volume "RHEL_Boot"Create-Volume Get-Task-object-Result

Unmanaged devices

Get-Umanaged device "Brocade 16G"Set-Umanaged device Management Interface

Get-Rack-Managers

HPE OneView Global Dashboard

Get-Certificates CA Get-Certificate of LIOGW-CA Add-Certificate of LIOGW-CA

1-Create a session 2-Get-X-API-Version 3-Get-Reports 4-Get-Appliance-1-Session key 5-Get-Appliance-2-Session key Get-Appliance named "Composer"Get-Server FW Get-Resources-alerts Appliance-1-Get-Ethernet-Networks Appliance-1-Get-Server-Profiles Appliance-2-Get-Server-Profiles

0_Session-Using OneView iLOSSOURL (requires Composer environment)

1- Login-sessions 2-Get-Server-Hardware : Frame 4 bay3 3-Get-Server-Hardware iLO iloSsoUrl 4-Get RedFish Sessions using SSO URL 5- Get Logical drives Settings

0_Session-Using OneView iLOSSO (requires Composer environment)

1- Login-sessions 2-Get-Server-Hardware : ilo-LIOGW.lj.lab 3-Get-Server-Hardware iLO Session key 4- Get Smart Storage Disk Drives 5- Get Logical drives 6- Get ServiceRoot 7- Get Users

Create Session with iLO AD Credentials

Adapters-Ethernet Interfaces

GET Ethernet Interfaces GET Ethernet Interface 1 GET Ethernet Interface 2 Disable Ethernet Interface 1 Enable Etherne Interface 1

Adapters-Network Adapter (includes HBA)-Deprecated

Base Network Adapter CNA1 (in Systems)BaseNetworkAdapters List with Filter (not working)Base Network Adapters List (in Systems)

Adapters-Network Adapter (includes HBA)-Network adapter modification

1- Network Adapters List (in Chassis)1.1- Network Adapter DC082000 Settings 1.2- Network Adapter DC082000 Port1 Settings 2- Get network adapter functions 3- Get FCoE function settings on an adapter 7- Get FCoE function information on an adapter 5 - Enable RedfishConfiguration on an adapter 6.2- Set FCoE function to FCoE (= FCoE Offload to Enable in BIOS)

Adapters-Network Adapter (includes HBA)

Network Adapters List (in Chassis)Network Adapters DC07B000 - Ports/1 Network Adapter CNA1 Network Adapter CNA1 functions Network Interfaces (in Systems)Network Interfaces - Network Ports (in Systems)

Host Bus Adapter List SmartStorage List Array Controller List Get System /v1/system/1 - Go to OEM/HPE/LINKS

BIOS Settings-Boot Settings

Get Boot properties from ComputerSystem Gen10 Current HpeServerBootSettings Gen10 Pending HpeServerBootSettings Gen10p, Gen11 Current HpeServerBootSettings Gen10p, Gen11 Pending Boot Settings Activate Boot Order Once to USB Gen11 Boot Settings BootOnNextServerReset Default Boot Order Gen11 Restore Bios Boot defaults Boot Options SecureBoot SecureBoot Enabled OneTime Boot

BIOS Settings-Thermal

Set the Server to remain Power OFF after thermal shutdown Set the thermal settings

Get Bios Settings - Current Settings Get Bios Settings - Pending Settings Get Bios BaseConfigs Swap ROM Gen10: Change Advanced Bios Attr C-states

Firmware-Inventory

GET Firmware inventory

Firmware-Offline FW Upgrade using SPP ISO

Create Session with iLO Credentials Compute Power On with boot from ISO Mount SPP ISO iLO Event Log Activate Boot Order Once iLO Integrated Management Log Find if SPP ISO ejected

Firmware-Update Service

Get Update Service SoftwareInventory Collection + Expand Query FirmwareInventory Collection + Expand Query POST SimpleUpdate for iLO FW Upgrade using file Get Update Task Queues Get Update Task Queue 1 Get Update Task Queue 2 POST Actions - Upload Component to iLO Repository Update task scheduled during a specific maintenance window Remove a component in the Installation Queue Remove all components in the Installation Task Queue Creation of a maintenance window Deletion of a specific maintenance window Deletion of all maintenance windows Get Install Sets Get Install Set 1 Get Install Set 2 Create Install Set Modify Install Set Add all the components of an install set in a cleared Installation Queue Get TaskService

Get Account service

iLO-Certificates

iLO SSL Certificate POST Generate CSR POST Import CA-signed certificate Certificate Login Enablement Import SSL/TLS Certificate Import CA Certificate Map Certificate to User Certificate Authentication User Certificate Mapping Trusted CA certificate collection Trusted CA certificate User mapped Certificate User Certificate Mapping collection

iLO-CloudConnect service-Proxy

Delete Proxy settings Get iLO Proxy settings

iLO-CloudConnect service

Is iLO controlled by OneView or COM?Get iLO COM connection status GET Views Connect iLO to COM Disconnect iLO from COM

Get iLO License Add iLO License Delete iLO License

iLO Event Log from today Integrated Management Log Entries iLO Security log

iLO Network Interfaces iLO Network configuration attributes iLO Virtual Network Interface iLO USB Virtual Ethernet Interface iLO4 NetworkProtocol/NetworkService iLO network protocols state GET iLO NIC IP Address iLO5 Set IPv6 StaticAddresses

iLO-Remote Support

Remote Support Service Remote Support Logs Register to Remote Support UnRegister Remote Support Trigger Test Event ClearEventLog Complete Remote Support Registration

Reset iLO iLO Factory Reset

Get Sessions w/ BasicAuthentication Delete Session

iLO-SNMP-Set and Enable SNMPv3

1- Enable SNMP protocol 3-Set SNMPv3 settings 6-Get all SNMPv3 users properties 5-Add SNMPv3 user

Add SNMP Alert Destination List SNMP Alert Destinations Delete SNMP Alert destination Enable/Disable SNMP protocol Enable/Disable SNMP Alerts SNMP Service iLO4 Enable/Disable SNMP protocol

SUT information

iLO-User Management

iLO User Collection AccountService end point New BMC user Modify iLO user iLO User Change iLO Administrator Password Delete Manager User Privileges of Authenticated Users Modify Privileges iLO Role Collection

iLO-Virtual Medias

Get Mount Medias Mount CentOS Livecd ISO_Boot Boot on Next server reboot Mount SPP ISO_RemovableMedia Un-Mount SPP ISO_1 Un-Mount SPP ISO_2

iLO Virtual NIC status Clear Rest Api State Get iLO Time Zone List Set iLO Time Zone Enable USB Virtual Ethernet Interface iLO5 HostName (Dedicated NIC)iLO5 Set FQDN Change iLO TimeZone Enable/Disable iLO SMTP

GET Memory DIMMs

Perform a graceful shutdown followed by a restart of the system iLO5-AuxPowerCycle iLO4-AuxPowerCycle Power Off Server PowerMetrics

Remote Support-Service Events

Gen10: Event Subscription

Get Remote Support Service

Security-Dashboard

Overall Security Dashboard Status Expanded Security Dashboard Params Collection Security Dashboard Param (SNMPv1)Security Dashboard Param (SecureBoot)Security Dashboard Param (Password complexity)Security Dashboard Parameters (SecureBoot)

GET SecurityService SecurityService (FIPS State)iLO4 Enforce AES 3DES Encryption GET Network Protocol PATCH TLS Default Config GET TLS Config - Pending Settings GET TLS Config - Default Settings GET Secure Boot Settings Security Schemas iLO Security Params Schema EntryPoint

Storage-Erase NS204i data

1-GET NS204i ID 2-Erase NS204i data 3-Restart the system

Storage-Smart Storage / Logical Drives-Logical Drives

GET Logical drives GET Logical drives Settings Delete a specific Logical Drive SanitizeDisk

Storage-Smart Storage / Logical Drives

Array Controllers List ArrayControllers 0 ArrayControllers 0 - Physical Drives List ArrayControllers 0 - Physical Drives 0 ArrayControllers 0 - Physical Drives 1 ArrayControllers 0 - Logical Drives List

GET Storage Devices Current Smart Storage Configuration Pending Smart Storage Configuration Set Smart Storage Encryption Boot Options Collection

Get RedFish Telemetry + Expand Query Get RedFish Telemetry Definitions Get average CPU0 frequency for 10mn/sensing interval 20s Get average CPU1 frequency for 10mn/sensing interval 20s Get Memory Bus Utilization for 10mn/sensing interval 20s Get Power Meters

iLO4 - Gen9-Certificates

POST Generate CSR GET Get CSR

iLO4 - Gen9-IP Address

GET iLO NIC IP Address PATCH iLO NIC to IP Static

iLO4 - Gen9-Sessions

Delete Session Get Sessions w/ BasicAuthentication

Get Systems/1/Patch SecureBoot POST iLO Reset GET PCI adapter info POST iLO Factory Reset Copy

iLO5 - Synergy Composer2

1-Create Session with iLO Credentials Get RedFish system Get DiskDrives list Get DiskDrives information

Get iLO - Triggers Get iLO - Thermal Get iLO - Thermal Configuration Get iLO - Power Metrics Get iLO - Power Regulator Change iLO - Power Regulator to Dynamic Power Savings Mode User Temp Config - SetUserTempThreshold - Criticial

Is iLO controlled by OneView or COM?Get System /v1/systems/1 Get iLO - /v1/managers/1 Get iLO - /v1/chassis GET PCI devices

HPE iLO Amplifier

1- Login-sessions Get-Managed Systems Get-Managers Get iLO 192.168.0.10 information Add an iLO

Home HPE iLO 0_Session-Using OneView iLOSSOURL (requires Composer environment)4-Get RedFish Sessions using SSO URL

4-Get RedFish Sessions using SSO URL

GET {{ilossourl}}

Get Session Token

HEADERS

Key	Datatype	Required	Description
`Content-Type`	string
`X-Auth-Token`	string

3-Get-Server-Hardware iLO iloSsoUrl

5- Get Logical drives Settings